What You Should Know About Reclining the Zero Gravity Chair

  • 2 min read
  • May 07, 2018

Zero gravity chair is one of innovative chair you can find today. This chair adapt the position that astronaut from NASA when they go to outer space. With this special design, you will feel that your body is less affected by gravity. The result is your body can relax.

Therefore, many people buy and use this chair to cure their muscle or bone position problem. Or, they just get this chair, so they can relax after they spend the whole day working at the office. However, there are still many people that don’t know How To Recline A Zero Gravity Chair.

They use it just like that, after they receive it from the store. So, here is what you need to do to set the angle of the reclining part of this chair.how to recline a zero gravity chair

The Type

Actually, the method to recline your zero gravity chair depends on the type of the controller that the manufacturer install on that chair. There is manual reclining control and automatic/motor-powered control.

Every brand has different chair with different type. Just find what you like. More than that, there are also price differences between the manual and automatic control type. So, you need to pay attention to this part as well.

Manual Type

For manual type, you just need to find the handle. It usually is located at the bottom part of chair. You can reach it while you lay down on the chair. Pull or push it, and feel it with your body if the angle is perfect for you. After you do that, just release the handle and it will lock the position.

Automatic Type

The automatic type or motor-powered reclining control is much easier. There is button that you can find near the arm rest. Just press and hold that button and the chair will automatically reclining.

Then, stop pressing the button, when you think that’s good angle for you. Some of zero gravity chairs also has memorizing feature, where you can set the angle previously.

So, when you want to use this zero gravity chair, you just need to activate the setting that you have saved previously. And, you don’t need to press anything. This chair will do the angle setting for you.

What You Should Know About Reclining the Zero Gravity Chairs

What You Need To Remember!

Both reclining control types will help you to set the angle easily. However, you also need to remember that you must place the chair on the area where there is enough space around it. Otherwise, the chair will hit other furniture or wall, if you place it in the too small or cramped room.

Just remember, the zero gravity chairs seems smaller, when you just open it from the package. But, actually the chair is much bigger than that, because it will recline and change it shape into bed-like shape, which is longer than its original size.

Basically, that’s what you need to know about how to recline your zero gravity chair. Once you get used to set it up, you won’t have any problem to create best angle where you can get maximum relaxation. So, you can get most benefits from this chair.

Related Post :

Leave a Reply

Your email address will not be published. Required fields are marked *